up to 35% OFF; priced as marked

Tilt Sculpted Oversized Double Clamp

List price: Inward Price: You save:
$ 36.99 $ 27.50 $ 9.49

We are terribly sorry, the product is currently out of stock. Please call us to find out more, maybe we can suggest an even better alternative. (214) 908-4452


This Tilt Sculpted oversized pro scooter clamp presents a subtle, well designed option for the riders who prefer to keep it cool. Custom bolts with a 6mm hex key drive and 50% larger threads provide more clamping power and help keep the bars in place and compression tight. Every clamp bolt from Tilt comes with pre-applied anti-seize to prevent the bolts from seizing to the clamp . This Sculpted scooter clamp is designed for oversized 1 3/8" OD bars as well as aluminum pro scooter bars. This clamp is made of CNC machined 6061 T-6 aircraft aluminum and comes in several anodized colors. This clamp is designed in Illinois, USA.

Recommended Bar Slit Length: 2.0 inch

Category
Scooter Clamps,
Weight
0.24 lbs (109 grams)
Type
Oversized Scooter Clamp
Brand
Tilt Scooters
Bolt
8mm
Clamp Height
1.875"
Finish
Anodized
Material
6061 Aluminum

Tools:  Allen wrench metric # 6, Ball bearing grease or anti seize compound.

Instructions:
Put grease on the bolt threads and under the bolt head. Place the clamp around the bottom of your pro scooter bar. Line up with slit in bar. Make sure slit is AT LEAST as long as clamp height. Slide the bar over the fork steerer tube till it hits the top of the headset. Line up the bar with the fork and front wheel. Tighten the bolts with a 6mm allen wrench. Switch between bolts while tightening to ensure even clamping and prevent stripping the threads. If you use HIC compression, tighten the compression before tightening the 2 bolts on the clamp.

Recommended Bar Slit Length: 2.0 inch

Limited lifetime manufacturer warranty.