Phoenix Smooth Double Clamp

List price: Inward Price: You save:
$ 20.00 $ 19.00 $ 1.00
In stock 0

Modeled after the popular smooth SCS, this Phoenix double clamp features High tensile M6 Allen bolts for worry free tightening.  This double clamp comes with a shim that allows it to be used with both standard 1 1/4 "OD and oversized 1 3/8" OD pro scooter bars as well as Aluminum scooter bars. This Phoenix scooter clamp comes in several anodized colors.

Recommended Bar Slit Length: 1.7 inch

Scooter Clamps
0.20 lbs (90 grams)
Dual Scooter Clamp
Phoenix Pro Scooters
Clamp Height
6061 Aluminum

Tools:  Allen wrench metric # 5, Ball bearing grease or anti seize compound.

Put grease on the bolt threads and under the bolt head. Place the clamp around the bottom of your pro scooter bar. Line up with slit in bar. Make sure slit is AT LEAST as long as clamp height. Slide the bar over the fork steerer tube till it hits the top of the headset. Line up the bar with the pro scooter fork and front wheel. Tighten the bolts with a 5mm allen wrench. Switch between bolts while tightening to ensure even clamping and prevent stripping the threads. If you use ICS or HIC compression, tighten the compression before tightening the bolts on the clamp.

Recommended Bar Slit Length: 1.7 inch

90 days against manufacturing defects.