|List price:||Inward Price:||You save:|
|$ 49.95||$ 25.00||$ 24.95|
The Envy SCS H Compression Clamp was designed to replace the headset dust cap offering a clean transition between the Headtube and Bar. Comes with Free SCS bar adapter for standard bars. The Envy H pro compression clamp is 3” tall which makes it suitable for forks with shorter steerer tubes. Ideally, the steerer of your fork sticks up between 1.25” and 1 3/8” above your headset. Envy SCS is designed for standard 1 1/4" outside diameter pro scooter bars. The scs compression clamp is made of CNC machined 6061 T6 aircraft aluminum and comes in many anodized colors. The clamp comes with compression cap, compression bolt and SCS adapter.
THREADLESS FORKS ONLY! Because of their long steerer tube, not recommended with District, Lucky, 5Starr, and MGP pro scooter forks.
Tools: Allen wrench metric # 5, Starnut Setter (selected, mostly steel forks), Ball bearing grease or anti seize compound .
THREADLESS FORKS ONLY! Because of their long steerer tube, not recommended with District, Lucky, 5Starr, and MGP forks.
Put grease or anti seize compound on the threads of the clamp bolts and under the head of the bolts! This prevents bolts from getting stuck in the clamp and allows you to tighten the bolts better. Envy SCS H compression is 3 inches tall so there is 1.5 inches of space in the clamp for your pro scooter fork which means you want to have 1.3 - 1.4" steerer above headset . If you are not currently using an SCS you will need to cut 1.5 inches off the bottom of your pro scooter bars as well to maintain your same bar height and remove the slit.
See also: http://www.scooterdad.com/article/proto-scs-installation
30 day Manufacturer warranty against cracking.