Tilt ARC Oversized Double Clamp

List price: Inward Price: You save:
$ 36.99 $ 34.99 $ 2.00
In stock 0

This Tilt ARC oversized pro scooter clamp is a rounder design than the  familiar Classic Clamp. It may just have 2  bolts, but has the strength of a triple clamp. Most scooter clamps will have metric 6 bolts but this one has much stronger metric 8 bolts with pre-applied anti-seize to prevent bolts from seizing in the clamp. This scooter clamp is designed for oversized 1 3/8" OD bars as well as aluminum pro scooter bars. This clamp is made of CNC machined 6061 T-6 aircraft aluminum and comes in several anodized colors. This clamp is designed and made in Illinois, USA.

Recommended Bar Slit Length: 2.0 inch

Category
Scooter Clamps,
Weight
0.23 lbs (104 grams)
Type
Oversized Scooter Clamp
Brand
Tilt Scooters
Bolt
8mm
Clamp Height
1.875"
Finish
Anodized
Made in
The USA
Material
6061 Aluminum

Tools:  Allen wrench metric # 6, Ball bearing grease or anti seize compound.

Instructions:
Put grease on the bolt threads and under the bolt head. Place the clamp around the bottom of yourpro scooter bar. Line up with slit in bar. Make sure slit is AT LEAST as long as clamp height. Slide the bar over the fork steerer tube till it hits the top of the headset. Line up the bar with the fork and front wheel. Tighten the bolts with a 6mm allen wrench. Switch between bolts while tightening to ensure even clamping and prevent stripping the threads. If you use HIC compression, tighten the compression before tightening the 2 bolts on the clamp.

Recommended Bar Slit Length: 2.0 inch

Limited lifetime manufacturer warranty.